Measure your foot for Ipari Prio

Sizing for a shoe is different than a sandal. And you probably have shoes of different sizes that fit you correctly.

So, to reduce the chance of getting an incorrect size, we HIGHLY recommend you follow these instructions.


Since the foot is three-dimensional, any two-dimensional measuring tool, such as a ruler or Brannock device, can only approximate your true shoe size. Manufacturers model their shoes on different foot shapes, so sizing may vary accordingly.

Our sizing recommendations are based on customer feedback, however we cannot 100% guarantee a proper fit.

Step 1 - Measure your foot

Place a piece of paper against a wall (if you have VERY large feet, use a piece of newspaper).

Place your foot on the paper, with your heel against the wall.

Make a mark on the paper at the furthest point away from the wall… this will either be just in front of your big toe or second toe.

Take a ruler and measure from the edge of the paper to the mark you made.

Here’s a video showing the process...

Step 2 - Check your measurement against the sizing chart


- For the most reliable fit, we recommend you use the foot length sizing info in the table below.

- The maximum recommended foot length in the table below is 8mm less than the length of the shoe insole / sock liner.

- If you already have Xero Shoes sandals, you MIGHT need one size larger in the Prio.

- The Prio is approximately EE width. It is a bit wider than the Hana and, with the multi-part upper, is more accommodating for wider feet.



Foot Length

M 7 Up to 24.4 cm
M 8 Up to 25.3 cm
M 9 Up to 26.1 cm
M 10 Up to 26.9 cm
M 11 Up to 27.8 cm
M 12 Up to 28.7 cm
M 13 Up to 29.6 cm
M 14 Up to 30.5 cm



Foot Length

W 5 Up to 21.3 cm
W 6 Up to 22.3 cm
W 7 Up to 23.0 cm
W 8 Up to 23.8 cm
W 9 Up to 24.7 cm
W 10 Up to 25.6 cm
W 11 Up to 26.4 cm


Any questions?

We want to make sure you get the correct size and enjoy your Xero Shoes.

If you have any questions or concerns, please contact us.